• -30%

DC-DC LCD Digital Step Up Down Module Buck Convertidor Regulador de voltaje 5.5-30V

DC-DC LCD Digital Step Up Down Module Buck Convertidor Regulador de voltaje 5.5-30V

$ 5,01 30% de descuento
$ 7,16
Sin impuestos
DC-DC LCD Digital Step UP Down Module Buck Convertidor Regulador de voltaje 5.5-30V
Step UP / Down Module
Característica:
1. Pantalla digital LCD, puede mostrar voltaje de entrada y salida, corriente de salida y potencia de salida.
2. Protección de conexión anti-inversa del extremo de entrada, la conexión inversa no se quemará.
3. Se puede utilizar para aumentar y reducir el voltaje, el voltaje de salida se puede ajustar arbitrariamente de 0,5 a 30 V y la corriente se puede ajustar arbitrariamente de 0 a 4 A.
4. El chip de refuerzo y reducción de voltaje se usa como controlador principal, el tubo MOS externo de 60 V 75 A se usa como tubo de interruptor, el doble schottky de 60 V 5 A SS56 se usa como rectificador, con suficiente resistencia al voltaje y suficiente potencia.
5. Ondulación de salida pequeña, con filtro LC.
Especificación:
Condición: 100 nuevo
Tipo de artículo: Módulo Step Up Down
Material: ABS
Color: Como se muestra en las imágenes
Voltaje de entrada: 5.5-30V
Voltaje de salida: 0.5-30V
Corriente de salida: puede funcionar de manera constante en 3A durante mucho tiempo y alcanzar 4A con disipación de calor mejorada
Potencia de salida: disipación de calor natural 35W, fortalecer la disipación de calor 50W
Resolución de pantalla de voltaje: 0.05V
Resolución de pantalla actual: 0.005A
Eficiencia de transferencia : Aprox. 88
Protección de conexión inversa de entrada: Sí
Riego antiinverso en el extremo de salida: Sí
Protección contra cortocircuitos: Sí
Frecuencia de trabajo: 180 KHZ
Tamaño: Aprox. 66.2x48.1mm / 2.61x1.89inch
Lista de paquetes:
1 x Módulo Step Up Down
1 x Cooling Fin
Módulo Step Down 5A
Características:
1. El corte y la interfaz precisos garantizan una aplicabilidad perfecta, adecuada para el lugar de instalación y fácil de instalar.
2. El producto adopta materiales de alta calidad que evitan eficazmente la corrosión y el desgaste y son duraderos.
3. El conjunto de chips profesional proporciona un rendimiento excelente en el sistema.
4. Fácil de operar, anti-envejecimiento y larga vida útil, puede usar con confianza.
5. Diseño hermoso y generoso, buena calidad táctil del botón, equipado con un botón para configurar el voltaje de salida, eliminando el problema de usar un cuchillo de palabras.
6. El botón puede controlar la salida de apagado y encendido, y puede establecer el valor predeterminado de ENCENDIDO o APAGADO.
7. La pantalla LCD puede mostrar el voltaje de entrada y salida, la corriente de salida y la potencia de salida.
8. Protección de conexión anti-inversa del extremo de entrada, la conexión inversa no se quemará
9. Alta eficiencia por encima del 93, poco calentamiento, ajuste arbitrario del voltaje de salida dentro de 1.2-32V y corriente constante dentro de 0-4.5A, adecuado para fuente de alimentación de oficina, impulsión de corriente constante LED de alta potencia, batería de litio y carga de batería.
Especificación:
Tipo de artículo: Módulo reductor
Nombre del producto: Módulo CNC reductor de 5A DC
Modelo de producto: HW-212
Voltaje de entrada: DC 6.5V -36V
Voltaje de salida: DC 1.2-32V
Corriente de salida: Trabajo estable para 3.5A y un máximo de 4.5A bajo una disipación de calor mejorada de (corriente límite ajustable máxima 4.2-4.5A)
Potencia de salida: Disipación de calor natural 50W (menos de 3.5A), disipación de calor mejorada 75W
Eficiencia de conversión: Aproximadamente 94
Funcionamiento Actual: Aproximadamente 30mA
Lista de paquetes:
1 x Módulo reductor
2 x Plantillas
1 x Kit de otros accesorios
Módulo reductor 8A
Características:
 · Las incisiones e interfaces precisas proporcionan una aplicabilidad perfecta, fácil de instalar.
 · Adopta materiales de alta calidad para evitar la corrosión y el desgaste de manera efectiva, duradera de usar.
 · La profesión al conjunto de chips proporciona un excelente rendimiento en el sistema.
 · Fácil de operar, anti-envejecimiento y prolonga la vida útil.
 · Componentes electrónicos de alta calidad, estables y fiables.
Especificación: Tipo de artículo: Módulo reductor
Material: ABS
Color: como se muestra en las imágenes
Tamaño del artículo: Aprox. 6.5 * 4.2 * 2.5 cm / 2.6 * 1.7 * 0.9 pulgadas
Lista de paquetes: 1 * Módulo
Nota: 1. Mantenga la diferencia de voltaje entre la entrada y la salida por encima de 2V.
2. Se recomienda una corriente de trabajo a largo plazo dentro de los 5A, si la potencia es demasiado grande, aumente el ventilador u otras formas de mejorar la disipación de calor.
3. Este módulo es un módulo reductor, no un módulo ascendente.
Cantidad

¡Se entregará el color / patrón / tamaño / tipo al comienzo del título y en la primera imagen!
DC-DC LCD Digital Step UP Down Module Buck Converter Voltage Regulator 5.5-30V
Step UP/Down Module
Feature:
1. LCD digital display, can display input and output voltage, output current and output power.
2. Input end anti-reverse connection protection, reverse connection will not burn out.
3. It can used for voltage boost and buck, the output voltage can adjusted arbitrarily from 0.5 to 30V, and the current can adjusted arbitrarily from 0 to 4A.
4. The voltage boost and buck chip is used as the main controller, external 60V 75A MOS tube is used as the switch tube, double 60V 5A SS56 schottky is used as the rectifier, with sufficient voltage resistance and sufficient power.
5. Output ripple small, with LC filter.
Specification:
Condition: 100% Brand New
Item Type: Step Up Down Module
Material: ABS
Color: As Pictures Shown
Input Voltage: 5.5-30V
Output Voltage: 0.5-30V
Output Current: Can work steadily in 3A for a long time and reach 4A under enhanced heat dissipation
Output Power: Natural heat dissipation 35W, strengthen heat dissipation 50W
Voltage Display Resolution: 0.05V
Current Display Resolution: 0.005A
Transfer Efficiency: Approx. 88%
Input Reverse Connection Protection: Yes
Anti Reverse Irrigation at Output End: Yes
Short Circuit Protection: Yes
Working Frequency: 180KHZ
Size: Approx. 66.2x48.1mm/2.61x1.89inch
Package List:
1 x Step Up Down Module
1 x Cooling Fin
Step Down Module 5A
Features:
1. Precise cut and interface ensure perfect applicability, suitable for installation location and easy to install.
2. The product adopts high-quality materials, effectively avoiding corrosion and wear, durable to use.
3. Professional chip set provides excellent performance in the system.
4. Easy to operate, anti-aging and long service life, you can use with confidence.
5. Beautiful and generous design, good touch-feeling quality of the button, equipped with button to set the output voltage, eliminating the trouble of using word knife.
6. The button can control the output off and on, and can set the default of ON or OFF.
7. LCD can display the input and output voltage, output current and output power.
8. Input end anti-reverse connection protection, reverse connection will not burn out
9. High efficiency above 93% , little heating, arbitrary adjustment of output voltage within 1.2-32V and constant current within 0-4.5A, suitable for office power supply, high-power LED constant current drive, lithium battery and battery charging.
Specification:
Item Type: Step-down Module
Product Name: 5A DC Step-down CNC Module
Product Model: HW-212
Input Voltage: DC 6.5V -36V
Output Voltage: DC 1.2-32V
Output Current: Stable work for 3.5A and maximum about 4.5A under enhanced heat dissipation of (maximum adjustable limiting current 4.2-4.5A)
Output Power: Natural heat dissipation 50W (less than 3.5A), enhanced heat dissipation 75W
Conversion Efficiency: About 94%
Operating Current: About 30mA
Package List:
1 x Step-down Module
2 x Templates
1 x Other Accessories Kit
Step Down Module 8A
Features:
· Accurate incisions and interfaces provide perfect applicability, easy to install.
· Adopts high-quality materials to avoid corrosion and wear effectively, durable to use.
· The professional chip set provides excellent performance in the system.
· Easy to operate, anti-aging and prolong service life.
· High quality electronic components, stable and reliable.
Specification:Item Type: Step-Down Module
Material: ABS
Color: As Pictures Shown
Item Size: Approx. 6.5 * 4.2 * 2.5 cm / 2.6 * 1.7 * 0.9 inch
Package List:1 * Module
Note:1. Keep the voltage difference between input and output above 2V.
2. Long-term working current is recommended within 5A, if the power is too large, please increase the fan or other ways to enhance heat dissipation.
3. This module is a step-down module, not a step-up module.
274021327124/1 - globes
274021327124/1

16 productos de la misma categoría: